Dektite Round EPDM Pipe Flashings in Multiple Colors and Three Different Sizes. Continuous Service Temperature Ranges of -58F to 239F (EPDM)

✔Continuous Service Temperature Ranges of -58F to 239F (EPDM)
✔Easily Customize Pipe Boot Size on the Job Site With Shears or Heavy Scissors
✔If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack
✔Use for Stove Pipes, Chimneys, Plumbing, Heating, Air Conditioning, Electrical and Exhaust Vents
✔Slide Flashing Down Pipe and Fasten Aluminum Collar To Roof With Metal Roofing Screws Every 1-1/2"
✔20 Year Manufacturer's Warranty Against Manufacturing Defects


Works with Metal Roof Pitches up to 10/12 (0 to 40 degrees)

On a Roof with a 10/12 to 12/12 Pitch (40 Degrees) Dektite Recommends You Use a Square Base Pipe Flashing Installed With The Base Tip Pointed Towards Roof Top. When Used With Deep Ribbed Profile Roofing Panels With 1-1/2" Deep Corrugation Or More, Consider Using Next Size Up That Will Accommodate The Same Diameter Pipe

Caution: This product is not rated for temperatures experienced by prolonged contact with a single wall chimney. Manufacturers Recommended Temperature Ranges Are Clearly Stated. Please Verify This Product Will Meet Specifications Of Your Installation Or Possible Product Damage May Occur

For single wall chimney applications consider using a High Temperature Silicone Flashing product that is rated for high temperature applications

#10 x 1-1/2" 50 Count No Paint Roofing Screws  Available Here

Installation Instructions  Available Here