Standard chain link fence installation uses approximately 1 wire tie every 12 inches on top rail and terminal posts, and 1 every 24 inches on line posts. For 100 linear feet of 6-foot fence, budget 150 to 200 wire ties.

Preformed fence ties are wire ties that have been bent into a hook shape at the factory. This allows them to be installed quickly by hand without bending tools - just hook around the mesh wire, wrap around the framework, and twist to secure.

Yes. A twist tie tool dramatically speeds up installation of wire ties on long fence runs. The tool hooks the tie and twists it tight in one motion, reducing hand fatigue and installation time significantly.

11-gauge preformed wire ties are standard for most residential chain link fence. Some commercial and heavier fence specifications use 9-gauge ties for added strength.

Wire ties are single-use fasteners. Once twisted tight, the wire work-hardens and becomes brittle at the twist point. Use new wire ties when removing and re-stretching fence mesh.

Our fence wire ties are made from galvanized steel wire, which resists rust for outdoor use in all weather conditions. The galvanized coating prevents corrosion contact between the tie wire and the chain link mesh.

Wire ties should be twisted just tight enough to hold the mesh snugly against the framework without deforming the mesh opening. Over-twisting can break the tie or distort the mesh pattern.

No special tools are required for hand installation. A pair of pliers can help with twisting in tough spots. A twist tie tool speeds up installation significantly on large fence projects.

Place ties along the top rail, at every line post, and at every terminal post. Space them approximately 12 inches apart on rails and terminal posts, and 24 inches apart on line posts, following standard chain link fence installation practice.

Our preformed wire ties are compatible with 9-gauge, 11-gauge, and 11.5-gauge chain link mesh, covering the full range of residential and commercial chain link fence fabric gauges.