#12 Metal to Metal Type #5 Roofing Screws

✔Self Driller Type #5 Metal to Metal Roofing Screws with a 5/16" Hex Head with a 9/16" EPDM Washer
✔The #12 x 1-1/2" Screw Has a Maximum Material Thickness of 5/8" with a 5/8" Drill Tip
✔Total Overall Length of the Screw Measured Under the Head is 1-3/8"
✔Fine Threaded Type 5 Screws generally used with thicker materials rated from 3/8" to 1/2"
✔To Install Metal Roofing or Wall Panels on Steel Frame Buildings, Workshops, Garages, Farm Buildings


Depending on the application and personal preference,

#12 GALVANIZED/ZINC x 1 1/2 Inch Long Metal to Metal Type #5 Roofing Screws
All our metal roofing screws use EPDM Washers to seal the screw to metal roofing panel to stop leaking. Our metal roofing screws EPDM washers hold up well to ozone, temperature extremes, ultraviolet radiation, and other harsh outdoor environmental conditions. The EPDM Washer is Bonded to a Galvanized Steel Washer Prevent Sealing Issues Due to Fluctuating Temperature Ranges. Compared to Neoprene Washers, the EPDM Temperature range of -60 to 350 F is Far Superior to Neoprene washers which have a much narrower temperature range.

When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended.