Reamer Tek Torx/Star Head Self-Drilling Wood to Metal Screws

✔Reference Installation Instructions Before Installing - NOT For Welded Seams or Tempered Metal
✔Reamer Tek Screws are for Applications where Wood is Being Fastened to Mild Steel or Aluminum

Reamer Tek Wood To Metal Screw Capabilities
The #10 x 1-5/8" Reamer Tek Wood to Metal Wood Screws use a T25 Torx/Star Bit (Not Included). Install screws at Medium speed (2,000 RPM) Faster speed may damage drill tip. Pre-Drilling During Installation is Normally Not Necessary, However You May need to Pre-Drill if using Tempered Steel or Installing into a Welded Seam.

 

#10 x 1-1/4" Wood to Metal Wafer Head Screws

✔Bronze Coated Wafer Head Is an ACQ Lumber Compatible Exterior Use Screw
✔Self Drilling - Engineered for Applications where Wood is Being Fastened to Steel or Aluminum
✔Torx/Star Drive delivers twice the torque of phillips or square drive screws with less slippage
✔Manufactured from high quality heat treated steel, screw will drill, tap and secure in one operation

Wood to Metal Wafer Head Screws
These #10-16 X 1-1/4 have a head diameter of about 7/16" and a thread length of ~7/8". Install these screws using a T25 Torx/Star drive bit. Wafer Screws with the drill point tip - will drill, tap, and secure in one operation. This Listing is for a 1 pound box - ~139 Approx. Screw Count