Skip to product information
1 of 7

#14 x 7/8" Metal to Metal Type #1 (250) 5/16" Hex Head -Drill Point - Stitch Tek - Metal to Metal Roofing Screws. 9/16" EPDM Washer

#14 x 7/8" Metal to Metal Type #1 (250) 5/16" Hex Head -Drill Point - Stitch Tek - Metal to Metal Roofing Screws. 9/16" EPDM Washer

Regular price $42.85 USD
Regular price
RETAIL PRICE
$54.99 USD
Sale price $42.85 USD
Sale Sold out

In-Stock Orders Will Ship Within
Hours
Minutes
Seconds

HOURS

MINUTES

SECONDS

View full details
#14 x 7/8" Metal to Metal Type #1 (250) 5/16" Hex Head -Drill Point - Stitch Tek - Metal to Metal Roofing Screws. 9/16" EPDM Washer

Some Colors Are Special Order - All Special Order Purchases are Final - No Cancellations Once Order is Placed - No Refunds - Please Call for Current Shipping Times (406) 752-5253

✔ Self drilling Type #1 Metal to Metal Stitching Screws have a 5/16" hex head with a 9/16" EPDM washer
✔ The #14 x 7/8" Screw is used to attach metal panels together along with several other uses
✔ Color on the roof screw heads is painted with a two part polyurethane for longer product life
✔ These screws have a self drilling tip, means no unnecessary pre drilling needed to install
✔ The 9/16" EPDM washer is designed to seal the screw to the metal panel to prevent leaking
✔ The 5/16" hex head provides a solid grip on the screw for positive installation
✔ Mechanical galvanized screws prevent corrosion and rusting
✔ Screws have been salt spray tested over 1,000 hours without product failure
✔ Also Used for attaching corner and rake trims and the ridge cap where they overlap wall steel


All our metal roofing screws use EPDM washers to seal the screw to metal roofing panel to prevent leaking. The EPDM washer is bonded to a galvanized steel washer to prevent sealing issues and to place even pressure on the EPDM washer. Our metal roofing screw EPDM washers hold up well to ozone, ultraviolet radiation, harsh outdoor environmental conditions and temperature extremes. Compared to neoprene washers, the EPDM temperature range of -60 to 350 F is far superior to Neoprene washers which have a much narrower temperature range. (EPDM - synthetic rubber)

Please keep in mind when choosing the best screw color to match your roofing that differences in computer screens, in sheet metal roofing production and roofing screw production, the color you order and the color of your roofing may vary to some degree

When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended.

Installation Instructions   Available Here

Magnetic Hex Driver  Available Here

Additional Color Matches by Manufacturer  Available Here