Skip to product information
1 of 5

#12x1-1/2" Metal to Metal Type #3 Hex Head Drill Point Metal to Metal Roofing Screws. 9/16" EPDM Washer (250 Screws)

#12x1-1/2" Metal to Metal Type #3 Hex Head Drill Point Metal to Metal Roofing Screws. 9/16" EPDM Washer (250 Screws)

Regular price $47.85 USD
Regular price
RETAIL PRICE
$60.99 USD
Sale price $47.85 USD
Sale Sold out

GS1: 840129214168

Shopify Product Page

This is a special order item.

Shopify Product Page


In-Stock Orders Will Ship Within
Hours
Minutes
Seconds

HOURS

MINUTES

SECONDS

View full details
#12x1-1/2" Metal to Metal Type #3 Hex Head Drill Point Metal to Metal Roofing Screws. 9/16" EPDM Washer (250 Screws)

Most Colors Are Special Order - All Special Order Purchases are Final - No Cancellations Once Order is Placed - No Refunds - Please Call for Current Shipping Times (406) 752-5253

✔Self Driller Type #3 Metal to Metal Roofing Screws with a 5/16" Hex Head with a 9/16" EPDM Washer
✔The #12 x 1-1/2" Screw Has a Maximum Material Thickness of 3/4" with a 1/2" Drill Tip
✔Coarse Threaded Type 3 Screws generally used in thinner or LIGHT STEEL OR ALUMINUM
✔Metal to Metal roofing screw heads are painted with two part polyurethane for long life.
✔The Galvanized/Zinc Screws Are Rust Resistant Under Gone Over 1,000 Hours of Salt Spray Testing
✔Self-Drill Type 3 Will Drill Through Metal Roofing Panel, Into Steel Structure Without Pre-Drilling
✔The EPDM Washer is Designed to Seal the Screw to the Metal Roofing Panel to Prevent Leaking
✔The 5/16" Hex Head Provides a Solid Lock on the Screw for Easy Installation.
✔To Install Metal Roofing or Wall Panels on Steel Frame Buildings, Workshops, Garages, Farm Buildings


All our metal roofing screws use EPDM Washers to seal the screw to metal roofing panel to stop leaking. Our metal roofing screws EPDM washers hold up well to ozone, temperature extremes, ultraviolet radiation, and other harsh outdoor environmental conditions. The EPDM Washer is Bonded to a Galvanized Steel Washer Prevent Sealing Issues Due to Fluctuating Temperature Ranges. Compared to Neoprene Washers, the EPDM Temperature range of -60 to 350 F is Far Superior to Neoprene washers which have a much narrower temperature range.

Please keep in mind when choosing the best screw color to match your roofing that differences in computer screens, in sheet metal roofing production and roofing screw production, the color you order and the color of your roofing may vary to some degree

When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended.

Installation Instructions   Available Here

***Insert_Text8***

Additional Color Matches by Manufacturer  Available Here