Durable Chain Link Spring Loaded Gate Closer

✔ Position Spring in the Manner Shown in the Image Provided - Around Gate Post On Side of the Spring
✔ Refer to Installation Instructions and Measuring Chain Link Fence Included on this Page
✔ You Need to Measure "Outside Diameter" of Both Gate Post and Gate Frame Prior to Ordering
✔ Rust Proof Aluminum Construction for Low Maintenance and To Prevent Corrosion
✔ Light Duty Gate Spring Closer Internal Springs Will Close the Gate When Opened in Either Direction
✔ Chain Link Gate Closer Includes the Necessary Bolts/Nuts for Installation


Designed To Be Used With a Standard Sized Chain Link Gate. One Self Closer Should work for a Standard Man Sized Chain Link Gate, However Two (2) are Recommended For Best Results. The Manufacturer Suggests Leaving a Slight Gap When Tightening Clamp on Post frame, Do Not Over-Tighten. The Manufacturer Recommends You Do not Force the Gate Open Past 90 Degrees While Using This Closer.

Please Check Your Local Regulations for Pool Gate Requirements. Regulations Vary From Area To Area. Thank you

Installation Instructions   Available Here

Closer Size	Measured By	Product Material
1-3/8" x 1-7/8" (2")	Outside Diameter of Gate Frame Post	Aluminum
1-3/8" x 2-3/8" (2-1/2")	Outside Diameter of Gate Frame Post	Aluminum