Most pool fence codes require a self-latching gate latch, one that automatically engages when the gate closes without manual operation. The latch must be positioned or designed to be out of reach of young children, typically above 54 inches or on the pool side of the gate.

This push-style pool gate latch is designed to meet the self-latching requirements of typical pool barrier codes. Always verify compliance with your local building code, as requirements vary by jurisdiction.

Yes. Most pool fence codes require both a self-latching latch and a self-closing mechanism such as a spring gate closer. The gate must close and latch on its own from any open position without assistance.

The latch bar automatically drops into the receiver when the gate closes. To open, you push the latch body toward the gate and lift the bar simultaneously. This two-step motion prevents young children from accidentally opening the gate.

Most codes require the release mechanism to be at least 54 inches from the ground or on the pool side of the gate. Check your local code for the specific height requirement in your jurisdiction.

This push-style pool gate latch meets the design criteria for self-latching pool barrier gates. Confirm approval with your local building department or pool inspector before installation to ensure local code compliance.

A padlock can be added to the latch mechanism if a padlock hole is present, providing additional lockout security when the gate needs to be secured against all entry.

This pool gate latch fits standard 1-3/8 inch and 1-5/8 inch chain link gate frames, covering the most common residential pool fence gate sizes.

Open the gate fully and release it without assistance. The gate should close completely under spring force and the latch should engage automatically. The gate should not be openable by a 4-year-old child under normal circumstances.

Inspect the latch monthly to confirm it is self-latching reliably. Lubricate the pivot point with a light oil or silicone spray, check mounting hardware for tightness, and test the self-latching function after any adjustment or impact.