Skip to product information
1 of 2

Gray Retrofit EPDM Flexible Pipe Flashing Dektite: Roof Jack -Pipe Boot - Pipe Flashing

Gray Retrofit EPDM Flexible Pipe Flashing Dektite: Roof Jack -Pipe Boot - Pipe Flashing

Regular price $41.99
RETAIL PRICE
Regular price $32.85 USD
Regular price
RETAIL PRICE
Regular price $41.99
Sale price $32.85 USD
Sale Sold out
Shipping calculated at checkout.

Free Shipping!!

Customer Reviews

Based on 2 reviews Write a review
View full details
Gray Retrofit EPDM Flexible Pipe Flashing Dektite: Roof Jack -Pipe Boot - Pipe Flashing

✔ Continuous Service Temperature Ranges of -58F to 239 F (EPDM) - All Sizes
✔ Easily Customize Pipe Boot Size on the Job Site With Shears or Heavy Scissors
✔ EPDM Rubber Boot with Flexible Base (Aluminum Collar) Seals Against Uneven Metal Roofing Easily
✔ Fasten Aluminum Collar To Metal Roof With Metal Roofing Screws Every 1-1/2"
✔ Where the Height of Pipe is Difficult to Reach or Existing Obstruction Blocks Top of Pipe;
✔ Flashing Can Be Cut Along the Seam and Resealed With Provided Clips
✔ If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack
✔ Reduces Building Maintenance Due To The Long Life of the Dektite Product
✔ Use for Stove Pipes, Chimneys, Plumbing, Heating, Air Conditioning, Electrical, and Exhaust Vents
✔ 20 Year Manufacturer's Warranty Against Manufacturing Defects


Works with Metal Roof Pitches up to 10/12 (0 to 40 degrees)

On a Roof with a 10/12 to 12/12 Pitch (40 Degrees) Dektite Recommends You Use a Square Base Pipe Flashing Installed With The Base Tip Pointed Towards Roof Top. When Used With Deep Ribbed Profile Roofing Panels With 1-1/2" Deep Corrugation Or More, Consider Using Next Size Up That Will Accommodate The Same Diameter Pipe

Caution: This product is not rated for temperatures experienced by prolonged contact with a single wall chimney. Manufacturers Recommended Temperature Ranges Are Clearly Stated. Please Verify This Product Will Meet Specifications Of Your Installation Or Possible Product Damage May Occur

For single wall chimney applications consider using a High Temperature Silicone Flashing product that is rated for high temperature applications

50 Count #10x1-1/2" Metal Roofing Screws for Dektite Installation Available Here

Installation Instructions Available Here

Product Number Fits Pipe Outside Diameter Base Size Diameter Temperature Range Flashing Material
RF801G 3/4" to 2-3/4" 6-1/3" -58F to 239F EPDM
RF802G 2" to 7-1/2" 10-3/4" -58F to 239F EPDM
RF803G 3-1/4" to 10" 14-1/2" -58F to 239F EPDM