Skip to product information
1 of 2

GRAY DEKTITE SQUARE BASE COMBO PIPE FLASHING BOOT: EPDM Square Base Flexible Pipe Flashing Dektite

GRAY DEKTITE SQUARE BASE COMBO PIPE FLASHING BOOT: EPDM Square Base Flexible Pipe Flashing Dektite

Regular price $62.85 USD
Regular price
RETAIL PRICE
$79.99 USD
Sale price $62.85 USD
Sale Sold out

GS1: 9316867050272


In-Stock Orders Will Ship Within
Hours
Minutes
Seconds

HOURS

MINUTES

SECONDS

View full details
GRAY DEKTITE SQUARE BASE COMBO PIPE FLASHING BOOT: EPDM Square Base Flexible Pipe Flashing Dektite

✔Rated for Continuous Service Temperature Ranges of -58F to 239F
✔This Dektite Product is Unique in Design, Can be Installed Like a Standard Pipe Flashing
✔Or Where the Height of Pipe is Difficult to Reach or Existing Obstruction Blocks Top of Pipe
✔Flashing Can Be Cut Along the Seam and Resealed With Provided Clips
✔Easily Customized on Site using Heavy Scissors or Shears.
✔Silicone Rubber Boot with Flexible Base (Aluminum Collar) Seals Against Uneven Metal Roofing Easily
✔Fasten Aluminum Collar To Metal Roof With Metal Roofing Screws Every 1-1/2"
✔If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack
✔Use for Stove Pipes, Chimneys, Plumbing, Heating, Air Conditioning, Electrical, and Exhaust Vents
✔Product Comes With a 20 Year Manufacturer's Warranty Against Manufacturing Defects


Works with Metal Roof Pitches up to 12/12 (0 to 45 degrees)

On a Roof with a 10/12 to 12/12 Pitch (45 Degrees) Dektite Recommends You Use a Square Base Pipe Flashing Installed With The Base Tip Pointed Towards Roof Top. When Used With Deep Ribbed Profile Roofing Panels With 1-1/2" Deep Corrugation Or More, Consider Using Next Size Up That Will Accommodate The Same Diameter Pipe

Manufacturers recommended temperature ranges are clearly stated Please verify this product will meet specifications of your installation or possible product damage may occur

Product Number Fits Pipe Outside Diameter Base Size Temperature Range Flashing Material
DC101GC 1/4" to 2-1/2" 5-1/2" X 5-1/2" -58F to 239F EPDM
DC102GC 1/4" to 3-1/4" 7" x 7" -58F to 239F EPDM
DC103GC 1/4" to 5" 8-3/4" x 8-3/4" -58F to 239F EPDM
DC104GC 3" to 7" 11-1/4" to 11-1/4 -58F to 239F EPDM
DC105GC 4-1/4" to 7-1/2" 14-1/4" X 14-1/4" -58F to 239F EPDM
DC106GC 5" to 9" 14-1/4" x 14-1/4" -58F to 239F EPDM
DC107GC 6" to 11" 17-3/4" X 17-3/4" -58F to 239F EPDM
DC108GC 7" to 13" 17-3/4" X 17-3/4" -58F to 239F EPDM
DC109GC 9-1/2" to 20" 27" x 27" -58F to 239F EPDM



Installation Instructions Available Here