A chain link fence T connector (end clamp/T-clamp) attaches a fence panel perpendicularly to an existing fence section, forming a T-intersection. It clamps around both pipes and bolts tight, creating a rigid connection without a separate terminal post.

T connector size must match the outside diameter of your fence tubing. Standard residential chain link uses 1-3/8 inch tubing; heavier residential and commercial uses 1-5/8 inch tubing. Measure the outside diameter of both pipes before ordering.

Yes. T connectors are commonly used in dog kennel construction to attach divider panels to the main kennel perimeter fence without installing additional posts. They provide a clean, secure connection.

A regular fence clamp attaches hardware (tension bars, brace rails) to a single post tube. A T connector clamps two perpendicular fence tubes together, creating a structural connection between two fence sections.

Position the connecting fence panel perpendicular to the existing fence run. Slide the T-clamp over both pipes at the intersection, insert the carriage bolt, and tighten the nut until the clamp is firmly secured and the panel does not move.

No. T connectors are made in matched sizes (1-3/8 x 1-3/8 or 1-5/8 x 1-5/8). Both pipes must be the same size. If you need to connect tubing of different diameters, a custom adapter or different hardware is required.

Yes. T connectors can be unbolted, repositioned, and reinstalled. This makes them ideal for temporary fence configurations or dog kennels that need to be reconfigured periodically.

Use one T connector at each height where the connecting panel meets the existing fence. For a 6-foot fence, use one T connector near the top and one near the bottom of the connecting panel for a secure, rigid joint.

A wrench or socket set is the only tool required. The carriage bolt and nut tighten with standard hand tools. No welding, drilling, or power tools are needed.

T connectors are designed for perpendicular (90-degree) connections between straight fence sections. They are not suitable for angled connections on curved or diagonal fence runs where a custom solution would be needed.