Skip to product information
1 of 2

DEKTITE SQUARE BLACK EPDM Flexible Pipe Flashing, Roof Jack, Pipe Boot Flashing Dektite

DEKTITE SQUARE BLACK EPDM Flexible Pipe Flashing, Roof Jack, Pipe Boot Flashing Dektite

Regular price $15.85 USD
Regular price
RETAIL PRICE
$20.99 USD
Sale price $15.85 USD
Sale Sold out

In-Stock Orders Will Ship Within
Hours
Minutes
Seconds

HOURS

MINUTES

SECONDS

View full details
DEKTITE SQUARE BLACK EPDM Flexible Pipe Flashing, Roof Jack, Pipe Boot Flashing Dektite

✔ Continuous Service Temperature Ranges of -58F to 239F (EPDM) - All Sizes
✔ Easily Customize Pipe Boot Size on the Job Site With Shears or Heavy Scissors
✔ EPDM Rubber Boot with Flexible Base (Aluminum Collar) Seals Against Uneven Metal Roofing
✔ Slide Flashing Down Pipe and Fasten Aluminum Collar To Roof With Metal Roofing Screws Every 1-1/2"
✔ If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack
✔ Reduces Building Maintenance Due To The Long Life of the Dektite Product
✔ Use for Stove Pipes, Chimneys, Plumbing, Heating, Air Conditioning, Electrical, and Exhaust Vents
✔ 20 Year Manufacturer's Warranty Against Manufacturing Defects


Works with Metal Roof Pitches up to 12/12 (0 to 45 degrees)

On a Roof with a 10/12 to 12/12 Pitch (45 Degrees) Dektite Recommends You Use a Square Base Pipe Flashing Installed With The Base Tip Pointed Towards Roof Top.When Used With Deep Ribbed Profile Roofing Panels With 1-1/2" Deep Corrugation Or More, Consider Using Next Size Up That Will Accommodate The Same Diameter Pipe

CAUTION This product is not rated for temperatures experienced by prolonged contact with a single wall chimney. Manufacturers Recommended Temperature Ranges Are Clearly Stated Please Verify This Product Will Meet Specifications Of Your Installation Or Product Damage May Occur

For single wall chimney applications consider using a High Temperature Silicone Flashing product that is rated for high temperature applications

50 Count #10x1-1/2" Metal Roofing Screws for Dektite Installation Available Here

Installation Instructions Available Here

Product Number Fits Pipe Outside Diameter Base Size Diameter Temperature Range Flashing Material
DFE10MB 0" TO 3/4" 2-3/4" X 2-3/4" -58F to 239F EPDM
DFE100B 0" TO 1-1/2" 4" X 4" -58F to 239F EPDM
DFE101B 1/4 to 2-14" 5-1/2" X 5-1/2" -58F to 239F EPDM
DFE102B 1/4" to 3" 7" X 7" -58F to 239F EPDM
DFE103B 1/4" to 5" 8-3/4" X 8-3/4" -58F to 239F EPDM
DFE104B 3" to 7" 11" X 11" -58F to 239F EPDM
DFE105B 4" to 8" 12-1/4" X 12-1/4" -58F to 239F EPDM
DFE106B 5" to 9" 14-1/4" X 14-1/4" -58F to 239F EPDM
DFE107B 6" to 12" 18" X 18" -58F to 239F EPDM
DFE108B 6-3/4" to 14" 19-1/2" X 19-1/2" -58F to 239F EPDM
DFE109B 9" to 20" 26-3/4" X 26-3/4" -58F to 239F EPDM