Dektite GRAY Round HIGH TEMPERATURE Silicone Flexible Pipe Flashing Dektite: Metal Roof Jack Pipe Boot - Metal Roofing Pipe Flashing

✔Continuous Service High Temperature Ranges of -58F to 392F (Silicone)
✔Easily Customize Pipe Boot Size on the Job Site With Shears or Heavy Scissors
✔Silicone Rubber Boot with Flexible Base (Aluminum Collar) Seals Against Uneven Metal Roofing
✔Slide Flashing Down Pipe and Fasten Aluminum Collar To Roof With Metal Roofing Screws Every 1-1/2"
✔If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack
✔20 Year Manufacturer's Warranty Against Manufacturing Defects


Works with Metal Roof Pitches up to 10/12 (0 to 40 degrees)

On a Roof with a 10/12 to 12/12 Pitch (40 Degrees) Dektite Recommends You Use a Square Base Pipe Flashing Installed With The Base Tip Pointed Towards Roof Top. When Used With Deep Ribbed Profile Roofing Panels With 1-1/2" Deep Corrugation Or More, Consider Using Next Size Up That Will Accommodate The Same Diameter Pipe

Manufacturers Recommended Temperature Ranges Are Clearly Stated Please Verify This Product Will Meet Specifications Of Your Installation Or Possible Product Damage May Occur

50 Count #10x1-1/2" Metal Roofing Screws for Dektite Installation  Available Here

Installation Instructions  Available Here

Prouduct Number	Fits Pipe Outside Diameter	Base Size	Temperature Range
DF203G	1/4" to 5"	8"	-58F to 392F
DF204G	3" to 6-1/4"	9-1/2"	-58F to 392F
DF205G	4-1/4" to 7-1/2"	11"	-58F to 392F
DF206G	5" to 9"	12-3/4"	-58F to 392F
DF207G	6" to 11"	14-3/4"	-58F to 392F
DF208G	7" to 13"	16-3/4"	-58F to 392F
DF209G	10" to 19"	25-1/2"	-58F to 392F