Dektite GRAY EPDM Flexible Round Pipe Flashing - Metal Roof Jack Pipe Boot - Metal Roofing Pipe Flashing
Dektite GRAY EPDM Flexible Round Pipe Flashing - Metal Roof Jack Pipe Boot - Metal Roofing Pipe Flashing
Regular price
$16.85 USD
Regular price
$22.99 USD
Sale price
$16.85 USD
Unit price
per
RETAIL PRICE
GS1: 316867008037
This is a special order item.
Couldn't load pickup availability
In-Stock Orders Will Ship Within
Hours
Minutes
Seconds
Dektite GRAY EPDM Flexible Round Pipe Flashing - Metal Roof Jack Pipe Boot - Metal Roofing Pipe Flashing
✔ Continuous Service Temperature Ranges of -58F to 239F (EPDM) All Sizes
✔ Easily Customize Pipe Boot Size on the Job Site With Shears or Heavy Scissors
✔ EPDM Rubber Boot with Flexible Base (Aluminum Collar) Seals Against Uneven Metal Roofing with Ease
✔ Slide Flashing Down Pipe and Fasten Aluminum Collar To Roof With Metal Roofing Screws Every 1-1/2"
✔ If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack
✔ Reduces Building Maintenance Due To The Long Life of the Dektite Product
✔ Use for Stove Pipes, Chimneys, Plumbing, Heating, Air Conditioning, Electrical, and Exhaust Vents
✔ 20 Year Manufacturer's Warranty Against Manufacturing Defects
Works with Metal Roof Pitches up to 10/12 (0 to 40 degrees)
On a Roof with a 10/12 to 12/12 Pitch (40 Degrees) Dektite Recommends You Use a Square Base Pipe Flashing Installed With The Base Tip Pointed Towards Roof Top. When Used With Deep Ribbed Profile Roofing Panels With 1-1/2" Deep Corrugation Or More, Consider Using Next Size Up That Will Accommodate The Same Diameter Pipe
CAUTION This product is not rated for temperatures experienced by prolonged contact with a single wall chimney. Manufacturers Recommended Temperature Ranges Are Clearly Stated Please Verify This Product Will Meet Specifications Of Your Installation Or Product Damage May Occur
For single wall chimney applications consider using a High Temperature Silicone Flashing product that is rated for high temperature applications.
50 Count #10x1-1/2" Metal Roofing Screws for Dektite Installation Available Here
Installation Instructions Available Here
✔ Continuous Service Temperature Ranges of -58F to 239F (EPDM) All Sizes
✔ Easily Customize Pipe Boot Size on the Job Site With Shears or Heavy Scissors
✔ EPDM Rubber Boot with Flexible Base (Aluminum Collar) Seals Against Uneven Metal Roofing with Ease
✔ Slide Flashing Down Pipe and Fasten Aluminum Collar To Roof With Metal Roofing Screws Every 1-1/2"
✔ If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack
✔ Reduces Building Maintenance Due To The Long Life of the Dektite Product
✔ Use for Stove Pipes, Chimneys, Plumbing, Heating, Air Conditioning, Electrical, and Exhaust Vents
✔ 20 Year Manufacturer's Warranty Against Manufacturing Defects
Works with Metal Roof Pitches up to 10/12 (0 to 40 degrees)
On a Roof with a 10/12 to 12/12 Pitch (40 Degrees) Dektite Recommends You Use a Square Base Pipe Flashing Installed With The Base Tip Pointed Towards Roof Top. When Used With Deep Ribbed Profile Roofing Panels With 1-1/2" Deep Corrugation Or More, Consider Using Next Size Up That Will Accommodate The Same Diameter Pipe
CAUTION This product is not rated for temperatures experienced by prolonged contact with a single wall chimney. Manufacturers Recommended Temperature Ranges Are Clearly Stated Please Verify This Product Will Meet Specifications Of Your Installation Or Product Damage May Occur
For single wall chimney applications consider using a High Temperature Silicone Flashing product that is rated for high temperature applications.
50 Count #10x1-1/2" Metal Roofing Screws for Dektite Installation Available Here
Installation Instructions Available Here
| Product Number | Fits Pipe Outside Diameter | Base Size Diameter | Temperature Range | Flashing Material |
|---|---|---|---|---|
| DF100G | 0" to 1-3/8" | 3-3/4" | -58F to 239F | EPDM |
| DF101G | 1/4" to 2-1/2" | 4-3/4" | -58F to 239F | EPDM |
| DF102G | 1-3/4" to 3-1/4" | 6-1/2" | -58F to 239F | EPDM |
| DF103G | 1/4" to 5" | 8" | -58F to 239F | EPDM |
| DF104G | 3" to 6-1/4" | 9-1/2" | -58F to 239F | EPDM |
| DF105G | 4-1/4" to 7-1/2" | 11" | -58F to 239F | EPDM |
| DF106G | 5" to 9" | 12-3/4" | -58F to 239F | EPDM |
| DF107G | 6" to 11" | 14-3/4" | -58F to 239F | EPDM |
| DF108G | 7" to 13" | 16-3/4" | -58F to 239F | EPDM |
| DF109G | 10" to 19" | 25-1/2" | -58F to 239F | EPDM |
