Cantilever wheels support a sliding gate from the side, allowing it to roll open and closed without a ground track. This makes them ideal for driveways and entrances where a track would be a tripping hazard or get blocked by debris or snow.

A standard cantilevered gate setup uses 4 rollers - 2 on the roll-back side and 2 on the opening side, positioned to support the gate weight evenly. Heavier or wider gates may require additional support rollers.

Select roller size based on your gate post diameter and gate weight. Mini rollers fit 2-3/8 inch posts; larger rollers are available for heavier commercial gates. Verify your gate total weight and width against the roller rated capacity.

Cantilever systems have no ground track to obstruct, collect debris, or become a trip hazard. The gate rolls freely regardless of ground surface condition, making cantilever ideal for busy driveways and vehicle-traffic areas.

Roller capacity varies by size. Residential cantilever roller sets typically support gates up to 400 lbs. Commercial rollers handle heavier gates. Always check the rated capacity for your specific roller model.

Yes. Periodically lubricate the roller bearings with a light machine oil or bearing grease to maintain smooth operation and extend bearing life. Inspect rollers annually for wear or roughness.

Most cantilever roller assemblies allow height and depth adjustment to align the gate correctly. Follow the manufacturer installation instructions for adjustment procedures specific to your roller model.

Cantilever wheels hang the gate from rollers on posts with no ground contact. V-groove track wheels run along a ground-level track. Cantilever is preferred for high-traffic or uneven-surface applications.

Replace cantilever wheels when the gate becomes hard to roll, makes grinding or squealing noises, or visibly wobbles or drops on one side when rolling. Worn bearings and cracked roller bodies are also signs of replacement need.

Most cantilever roller systems are designed for standard chain link gate frame tubing in 1-5/8 or 1-7/8 inch OD. Verify compatibility with your specific frame size before ordering.