#8 Cement Board Torx/Star Head Screws DRILL Point for Fastening Cement Backer Board/Cement Board/Tile Board - Torx/Star - T-25 Torx Head

✔ Drill Point Cement Board Screws for Fastening Cement Board to METAL Studs
✔ Manufactured from High Quality Heat Treated Steel, Corrosion Resistant, Ceramic Coated
✔ For All Brands of Cement Board; Hardiebacker, Wonderboard, PermaBase DuRock Backer Board
✔ Cutting Nibs Under the Head Cleanly Countersinks Screw Head Flush With Surface During Installation
✔ Deep, Wide, Sharp Screw Threads Provide Maximum Holding Power, Cut Clean and Easy Through Materials
✔ Drill Point Tip Means No Pre-Drilling is Necessary and Will Cut Into Metal Stud to Secure Product
✔ Torx/Star Drive Delivers Twice the Torque of a Phillips or Square Drive Screw
✔ Deep Torx/Star Drive Head Reduces "Cam-out" of Screw Head During Installation With Less Slippage


Installation Instructions  Available Here

Need a T25 Torx/Star Drive Bit  Available Here

Screw Size / Point Type	Package Size	Approximate Screw Count	Torx Bit Size	Interior/Exterior
8 x 1-1/4" Sharp Point	1 Pound	166	T25	Interior
8 x 1-1/4" Sharp Point	5 Pounds	830	T25	Interior
8 x 1-1/4" Sharp Point	Full Box	5,000	T25	Interior
8 x 1-1/4" Drill Point	1 Pound	161	T25	Interior
8 x 1-1/4" Drill Point	5 Pounds	805	T25	Interior
8 x 1-1/4" Drill Point	Full Box	5,000	T25	Interior
8 x 1-5/8" Sharp Point	1 Pound	133	T25	Interior
8 x 1-5/8" Sharp Point	5 Pounds	665	T25	Interior
8 x 1-5/8" Sharp Point	Full Box	4,000	T25	Interior
8 x 1-5/8" Drill Point	1 Pound	129	T25	Interior
8 x 1-5/8" Drill Point	5 Pounds	645	T25	Interior
8 x 1-5/8" Drill Point	Full Box	4,000	T25	Interior