#17 x 1" Metal Panel to Metal Purlins and Recovery Screws for Older Structures With Stripped Out and Loose Existing Screws

Most of these products are Special Order Items. - Call 406-752-5253 For Shipping Times - No Refunds Once Items Ships

✔ #17 Metal Roofing Screws For Metal Panels To Metal Purlins
✔ Also As a Recovery Screws For Repair or Replacement of Loose Screws
✔ Roofing Screw Has A 3/8" Hex Head And a EPDM Bonded Washer To Prevent Leaks
✔ Type AP Point Requires Pre-Drilling for Installation
✔ Galvanized To Resist Corrosion


Please keep in mind when choosing the best screw color to match your roofing that differences in computer screens, in sheet metal roofing production and roofing screw production, the color you order and the color of your roofing may vary to some degree

All our metal roofing screws use EPDM Washers to seal the screw to metal roofing panel to stop leaking. Our metal roofing screws EPDM washers hold up well to ozone, temperature extremes, ultraviolet radiation, and other harsh outdoor environmental conditions. The EPDM Washer is Bonded to a Galvanized Steel Washer Prevent Sealing Issues Due to Fluctuating Temperature Ranges. Compared to Neoprene Washers, the EPDM Temperature range of -60 to 350 F is Far Superior to Neoprene washers which have a much narrower temperature range.

ONLY screw head is painted to ensure EPDM washer seals to metal roof. NO paint on the threads to maximize holding strength.

When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended.

Additional Color Matches by Manufacturer  Available Here

We have no affiliation with the manufacturers found on this page, all rights and privileges of the above manufacturers are the property of that manufacturer. Jake Sales branded screws are not authorized by or endorsed by the above metal manufacturers. The above information is provided solely for comparison sake.

Need a 3/8" Hex Drive?  Available Here