Skip to product information
1 of 4

#14 x 3" Metal ROOFING SCREWS - Hex Head Sheet Metal Roof Screw. Self starting/tapping metal to woodsheet metal screws with EPDM washer. For corrugated roofing

#14 x 3" Metal ROOFING SCREWS - Hex Head Sheet Metal Roof Screw. Self starting/tapping metal to woodsheet metal screws with EPDM washer. For corrugated roofing

Shopify Product Page

Regular price $53.85 USD
Regular price
RETAIL PRICE
$68.99 USD
Sale price $53.85 USD
Sale Sold out

GS1: 840129206743

Shopify Product Page

Delayed Delivery Item


In-Stock Orders Will Ship Within
Hours
Minutes
Seconds

HOURS

MINUTES

SECONDS

View full details
#14 x 3" Metal ROOFING SCREWS: Hex Head Sheet Metal Roof Screw. Self starting/tapping metal to woodsheet metal screws with EPDM washer. For corrugated roofing

✔Screws have a 5/16 Inch Hex Screw Head and ~9/16" diameter EPDM washer to seal screws to roof panel
✔Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily
✔#14 Sheet Metal roofing screws are galvanized for corrosion resistance
✔Galvanized Coating has passed the 1,000 hour salt spray corrosion test without failures
✔Self starting roofing screws help take the headache out of sheet metal roof and siding installation
✔Use on any metal roofing or siding project, where 2-1/2 inch roofing screws are needed
✔For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to
✔Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing


Please keep in mind when choosing the best screw color to match your roofing that differences in computer screens, in sheet metal roofing production and roofing screw production, the color you order and the color of your roofing may vary to some degree

ONLY screw head is painted to ensure EPDM washer seals to metal roof. NO paint on the threads to maximize holding strength.

All our metal roofing screws use EPDM washers to seal the screw to metal roofing panel to prevent leaking. The EPDM washer is bonded to a galvanized steel washer to prevent sealing issues and to place even pressure on the EPDM washer. Our metal roofing screw EPDM washers hold up well to ozone, ultraviolet radiation, harsh outdoor environmental conditions and temperature extremes. Compared to neoprene washers, the EPDM temperature range of -60 to 350 F is far superior to Neoprene washers which have a much narrower temperature range. (EPDM - synthetic rubber)

When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended.

Installation Instructions  Available Here

Additional Color Matches by Manufacturer   Available Here - Follow the Link

We have no affiliation with the manufacturers found on this page, all rights and privileges of the above manufacturers are the property of that manufacturer. Jake Sales branded screws are not authorized by or endorsed by the above metal manufacturers. The above information is provided solely for comparison sake.

Needing a 5/16" Hex Head Drill Bit?   Available Here - Follow the Link