10 x 4" Metal Roofing Screws (250) Galvanized Hex Head Sheet Metal Roof Screw. Self starting metal to wood siding screws. EPDM washer

Most Products are Special Order. Call 406.752.5253 For Order and Shipping Information. Special Orders Cannot Be Returned Once Ordered

✔Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - HI LO Thread
✔Metal Screws are painted to closely match many brands of metal roofing though color may vary
✔Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc)
✔Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily
✔#10 Sheet Metal roofing screws are galvanized for corrosion resistance
✔Galvanized Coating has passed the 1,000 hour salt spray corrosion test without failures
✔For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to
✔Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing


Please keep in mind when choosing the screw color to match your roofing that differences in computer screens, in sheet metal roofing production and roofing screw production runs and age of existing metal, the color you order and the color of your roofing may vary to some degree

All our metal roofing screws use EPDM washers to seal the screw to metal roofing panel to prevent leaking. The EPDM washer is bonded to a galvanized steel washer to prevent sealing issues and to place even pressure on the EPDM washer. Our metal roofing screw EPDM washers hold up well to ozone, ultraviolet radiation, harsh outdoor environmental conditions and temperature extremes. Compared to neoprene washers, the EPDM temperature range of -60 to 350 F is far superior to Neoprene washers which have a much narrower temperature range. (EPDM - synthetic rubber)

ONLY screw head is painted to ensure EPDM washer seals to metal roof. NO paint on the threads to maximize holding strength

When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended.

Color Matches by Roofing Manufacturers  Available Here
We have no affiliation with the manufacturers mentioned in the comparison chart. Jake Sales branded screws are not authorized by or endorsed by any of the afore mentioned manufacturers. The information is provided solely for comparison purposes. All rights and privileges of the above manufacturers are the property of that manufacturer.

Need a 1/4 Hex Head Driver?  Available Here