Skip to product information
1 of 5

10 x 2" Metal ROOFING SCREWS: (250) Hex Head Mini Driller Sheet Metal Roof Screw. Self starting metal to wood siding screws. EPDM washer.

10 x 2" Metal ROOFING SCREWS: (250) Hex Head Mini Driller Sheet Metal Roof Screw. Self starting metal to wood siding screws. EPDM washer.

Regular price $39.85 USD
Regular price
RETAIL PRICE
$50.99 USD
Sale price $39.85 USD
Sale Sold out

SKU: 687748059653

Shopify Product Page

This is a special order item.

Shopify Product Page


In-Stock Orders Will Ship Within
Hours
Minutes
Seconds

HOURS

MINUTES

SECONDS

View full details
10 x 2" Metal ROOFING SCREWS: (250) Hex Head Mini Driller Sheet Metal Roof Screw. Self starting metal to wood siding screws. EPDM washer.

Most Colors Are Special Order - All Special Order Purchases are Final - No Cancellations Once Order is Placed - No Refunds - Please Call for Current Shipping Times (406) 752-5253

✔ Screws have a 1/4 Inch Hex Screw Head and 1/2" EPDM washer seals screws to roofing panel
✔ Self drilling, self starting roofing screws for sheet metal roof and siding installation
✔ Metal-to-Wood roofing screws have a Mini-Drilling Tip for faster start times
✔ Increased performance when drilling through two layers of metal roofing, reduces shavings
✔ The color on the roof screw heads is painted with a two part polyurethane for longer product life
✔ Galvanized Mini-Drilling Roofing Screws 1,000 hour salt spray corrosion tested without failures
✔ For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to
✔ Rough Estimation - Regular Roofing Project Should Require 80 Screws per 10' x 10' Section of Roofing


All our metal roofing screws use EPDM washers to seal the screw to metal roofing panel to prevent leaking. The EPDM washer is bonded to a galvanized steel washer to prevent sealing issues and to place even pressure on the EPDM washer. Our metal roofing screw EPDM washers hold up well to ozone, ultraviolet radiation, harsh outdoor environmental conditions and temperature extremes. Compared to neoprene washers, the EPDM temperature range of -60 to 350 F is far superior to Neoprene washers which have a much narrower temperature range. (EPDM - synthetic rubber)

Please keep in mind when choosing the best screw color to match your roofing that differences in computer screens, in sheet metal roofing production and roofing screw production, the color you order and the color of your roofing may vary to some degree

When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended.

Installation Instructions Available Here

Magnetic Hex Driver Available Here

Additional Color Matches by Manufacturer Available Here