#10 x 1 inch Sheet Metal Roofing Screws 250 Count

Some Colors Are Special Order - All Special Order Purchases are Final - No Cancellations Once Order is Placed - No Refunds - Please Call for Current Shipping Times (406) 752-5253

✔Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 1" Head to Tip
✔Metal Screws are painted to closely match many brands of metal roofing though color may vary
✔Colored roofing screw heads are painted with a two part polyurethane for longer product life
✔Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily
✔#10 Sheet Metal roofing screws are galvanized for corrosion resistance
✔Galvanized Coating has passed the 1,000 hour salt spray corrosion test without failures
✔Self-starting roofing screws help take the headache out of sheet metal roof and siding installation
✔Use on any metal roofing or siding project, where 1 inch metal to wood roofing screws are needed
✔For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to
✔Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing


#10 x 1 inch Long Sheet Metal Roofing Screws
All our metal roofing screws use EPDM washers to seal the screw to metal roofing panel to prevent leaking. The EPDM washer is bonded to a galvanized steel washer to prevent sealing issues and to place even pressure on the EPDM washer. Our metal roofing screw EPDM washers hold up well to ozone, ultraviolet radiation, harsh outdoor environmental conditions and temperature extremes. Compared to neoprene washers, the EPDM temperature range of -60 to 350 F is far superior to Neoprene washers which have a much narrower temperature range. (EPDM - synthetic rubber)

Please keep in mind when choosing the best screw color to match your roofing that differences in computer screens, in sheet metal roofing production and roofing screw production, the color you order and the color of your roofing may vary to some degree

When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended.

Installation Instructions Available Here Follow the Link

1/4" Hex Head Driver Bit Available Here

Additional Color Matches by Manufacturer Available Follow the Link