10 x 1" Metal ROOFING SCREWS: (250) Hex Head Mini Driller Sheet Metal Roof Screw. Self starting metal to wood siding screws. EPDM washer.

Most Colors Are Special Order - All Special Order Purchases are Final - No Cancellations Once Order is Placed - No Refunds - Please Call for Current Shipping Times (406) 752-5253

✔ Screws have a 1/4 Inch Hex Screw Head and 1/2" EPDM washer seals screws to roofing panel
✔ Self drilling, self starting roofing screws for sheet metal roof and siding installation
✔ Metal-to-Wood roofing screws have a Mini-Drilling Tip for faster start times
✔ Increased performance when drilling through two layers of metal roofing, reduces shavings
✔ Galvanized Mini-Drilling Roofing Screws 1,000 hour salt spray corrosion tested without failures
✔ For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to
✔ Rough Estimation - Regular Roofing Project Should Require 80 Screws per 10' x 10' Section of Roofing


All our metal roofing screws use EPDM Washers to seal the screw to metal roofing panel to stop leaking. Our metal roofing screws EPDM washers hold up well to ozone, temperature extremes, ultraviolet radiation, and other harsh outdoor environmental conditions. The EPDM Washer is Bonded to a Galvanized Steel Washer Prevent Sealing Issues Due to Fluctuating Temperature Ranges. Compared to Neoprene Washers, the EPDM Temperature range of -60 to 350 F is Far Superior to Neoprene washers which have a much narrower temperature range.

Please keep in mind when choosing the best screw color to match your roofing that differences in computer screens, in sheet metal roofing production and roofing screw production, the color you order and the color of your roofing may vary to some degree

When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended.

Installation Instructions Available Here

Magnetic Hex Driver Available Here

Additional Color Matches by Manufacturer Available Here