10 x 1-1/2" STAINLESS HEX HEAD - Mini Driller Sheet Metal Roof Screw. Self starting metal to wood siding screws. EPDM washer.

Most If Not All Of these Items Are Special Order Only. Call 406-752-5253 For Information. No Returns Once The Product is Ordered

✔Screws have a 1/4 Inch Hex Screw Head and 1/2" EPDM washer seals screws to roofing panel
✔Stainless Steel Hex Head to Resist Corrosion When Used In High Humidity or Salt Water Exposure
✔ZINC Plated Carbon Steel Shank To Resist Corrosion - 40 Year Warranty
✔Self drilling, self starting roofing screws for sheet metal roof and siding installation
✔Metal-to-Wood roofing screws have a Mini-Drilling Tip for faster start times
✔Increased performance when drilling through two layers of metal roofing, reduces shavings
✔Rough Estimation - Regular Roofing Project Should Require 80 Screws per 10' x 10' Section of Roofing


Please keep in mind when choosing the screw color to match your roofing that differences in computer screens, in sheet metal roofing production and roofing screw production runs and age of existing metal, the color you order and the color of your roofing may vary to some degree

All our metal roofing screws use EPDM washers to seal the screw to metal roofing panel to prevent leaking. Our EPDM washers hold up well to ozone, ultraviolet radiation, harsh outdoor environmental conditions and temperature extremes. Compared to neoprene washers, the EPDM temperature range of -60 to 350 F is far superior to Neoprene washers which have a much narrower temperature range. (EPDM - synthetic rubber)

When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended.

ONLY screw head is painted to ensure EPDM washer seals to metal roof. NO paint on the threads to maximize holding strength

Additional Color Matches by Manufacturer   Available Here
We have no affiliation with the manufacturers mentioned in the comparison chart. Jake Sales branded screws are not authorized by or endorsed by any of the afore mentioned manufacturers. The information is provided solely for comparison purposes. All rights and privileges of the above manufacturers are the property of that manufacturer.

Need a 1/4" Hex Driver Bit?  Available Here