T40 Torx Bit - Color-Coded Star Drive for T-40 Fasteners
T40 Torx Bit - Color-Coded Star Drive for T-40 Fasteners
1" (Each)
GS1: 840129209782
Delayed Delivery Item
Couldn't load pickup availability
What is a T40 torx bit used for?
What is a T40 torx bit used for?
A T40 torx bit is used for large T40 star-drive fasteners found in heavy deck construction, automotive applications, and industrial machinery. T40 is larger than T30 and is near the upper end of common Torx sizes.
How do I identify which Torx size I need?
How do I identify which Torx size I need?
Try fitting a bit into the fastener recess. It should fit snugly with no wobble and no forcing. If a T30 bit feels loose and a T45 will not fit, you need T40.
What is S2 tool steel for torx bits?
What is S2 tool steel for torx bits?
S2 steel is a shock-resistant tool steel used for high-quality driver bits. It resists tip chipping and rounding better than lower-grade steel, giving the bit a longer service life under high-torque applications.
Is the T40 bit compatible with impact drivers?
Is the T40 bit compatible with impact drivers?
Yes. The 1/4 inch hex shank fits standard impact drivers. For regular high-torque impact use, select an impact-rated T40 bit made from shock-resistant steel to prevent tip cracking.
What deck screws use a T40 bit?
What deck screws use a T40 bit?
Some heavy-duty structural screws and large-diameter deck screws use T40 drive. Check the screw packaging for the specified drive size, as manufacturers vary between T25, T30, and T40 depending on screw size.
Can I use a T40 bit for automotive work?
Can I use a T40 bit for automotive work?
Yes. T40 Torx fasteners appear in automotive brake systems, suspension components, and engine accessories. A T40 bit with a standard hex shank fits extension bars and sockets for automotive use.
How do I know when a T40 bit is worn out?
How do I know when a T40 bit is worn out?
Worn torx bits show rounding on the 6 star points, which causes them to slip in the fastener recess even when proper pressure is applied. Replace the bit when you notice increased cam-out or visible tip wear.
Is T40 the same as T45?
Is T40 the same as T45?
No. T40 and T45 are two distinct Torx sizes. T45 is larger and the two are not interchangeable. Using a T40 in a T45 recess will cause cam-out and fastener damage.
What is the maximum torque a T40 bit can handle?
What is the maximum torque a T40 bit can handle?
T40 Torx bits are designed for the torque levels corresponding to large fasteners. Specific torque limits depend on bit material and quality, but premium S2 steel T40 bits handle the full torque output of most standard drills and impact drivers.
Do T40 bits come in longer lengths?
Do T40 bits come in longer lengths?
T40 bits are commonly available in 1-inch and 2-inch lengths. Extension bars can increase the working depth for driving screws in recessed locations.
The T40 torx bit drives fasteners with a T-40 star recess, one of the largest standard Torx sizes in common use. Our T40 bit features a color-coded design for instant identification in a mixed bit set and a quick-change 1/4 inch hex shank that fits all standard drills and impact drivers. T40 torx fasteners appear in heavy structural applications including large deck screws, automotive assemblies, and industrial machinery. The 6-point star geometry provides maximum torque transfer for high-force fastening without cam-out.
T40 (T-40) Torx/Star Driver Bit - Color Coded T40 Torx/Star Drive Bit for Screws and Fasteners Requiring T40 (T-40) Size Bits
T40 T-40 Torx/Star Drive Bits - Torx Bit Size Engraved on Driver Bit
Bit is Made of Tool Grade S2 Industrial Steel for Long Torx/Star Driver Bit Life.
Use With Standard Drills and Impact Drivers with Quick Change Heads
Torx/Star Drive Bit Set is Impact Rated - Use with Screw Heads Requiring T40 T-40 Bit Drivers.
1 Inch Driver Bits Are Not Rated To Be Used In a Quick Change Shank
1 Inch Bit Shank is Cut For Use With a "C" Ring Retainer
1 Inch Bit Should be Used With A Magnetic Holder Utilizing a C-Ring Retainer System
Installation Instructions - Available Here
| Torx Bit Name | Torx Bit Length | Quantity | Quick Change Shank Compatible? |
|---|---|---|---|
| T10 x 1 | 1 Inch | Each | No |
| T10 x 1 | 1 Inch | 10 Pack | No |
| T10 x 2 | 2 Inch | Each | Yes |
| T10 x 2 | 2 Inch | 5 Pack | Yes |
| T10 x 3-1/2 | 3-1/2 Inch | Each | Yes |
| T10 x 3-1/2 | 3-1/2 Inch | 5 Pack | Yes |
| T10 x 6 | 6 Inch | Each | Yes |
| T10 x 6 | 6 Inch | 5 Pack | Yes |
| T15 x 1 | 1 Inch | Each | No |
| T15 x 1 | 1 Inch | 10 Pack | No |
| T15 x 2 | 2 Inch | Each | Yes |
| T15 x 2 | 2 Inch | 5 Pack | Yes |
| T15 x 3-1/2 | 3-1/2 Inch | Each | Yes |
| T15 x 3-1/2 | 3-1/2 Inch | 5 Pack | Yes |
| T15 x 6 | 6 Inch | Each | Yes |
| T15 x 6 | 6 Inch | 5 Pack | Yes |
| T20 x 1 | 1 Inch | Each | No |
| T20 x 1 | 1 Inch | 10 Pack | No |
| T20 x 2 | 2 Inch | Each | Yes |
| T20 x 2 | 2 Inch | 5 Pack | Yes |
| T20 x 3-1/2 | 3-1/2 Inch | Each | Yes |
| T20 x 3-1/2 | 3-1/2 Inch | 5 Pack | Yes |
| T20 x 6 | 6 Inch | Each | Yes |
| T20 x 6 | 6 inch | 5 Pack | Yes |
| T25 x 1 | 1 Inch | Each | No |
| T25 x 1 | 1 Inch | 10 Pack | No |
| T25 x 2 | 2 Inch | Each | Yes |
| T25 x 2 | 2 Inch | 5 Pack | Yes |
| T25 x 3-1/2 | 3-1/2 Inch | Each | Yes |
| T25 x 3-1/2 | 3-1/2 Inch | 5 Pack | Yes |
| T25 x 6 | 6 Inch | Each | Yes |
| T25 x 6 | 6 Inch | 5 Pack | Yes |
| T30 x 1 | 1 Inch | Each | No |
| T30 x 1 | 1 Inch | 10 Pack | No |
| T30 x 2 | 2 Inch | Each | Yes |
| T30 x 2 | 2 Inch | 5 Pack | Yes |
| T30 x 3-1/2 | 3-1/2 Inch | Each | Yes |
| T30 x 3-1/2 | 3-1/2 Inch | 5 Pack | Yes |
| T30 x 6 | 6 Inch | Each | Yes |
| T30 x 6 | 6 inch | 5 Pack | Yes |
| T40 x 1 | 1 Inch | Each | No |
| T40 x 1 | 1 Inch | 10 Pack | No |
| T40 x 2 | 2 Inch | Each | Yes |
| T40 x 2 | 2 Inch | 5 Pack | Yes |
| T40 x 3-1/2 | 3-1/2 Inch | Each | Yes |
| T40 x 3-1/2 | 3-1/2 Inch | 5 Pack | Yes |
| T40 x 6 | 6 Inch | Each | Yes |
| T40 x 6 | 6 Inch | 5 Pack | Yes |
| 1 Inch Set in Holder | 1 Inch | Each | No |
| 2 Inch Set in Holder | 2 Inch | Each | Yes |
